TORONTO, Dec. 5, 2012 /CNW/ - Duluth Metals Limited ("Duluth Metals") (TSX: DM) (TSX: DM.U) references its press release of December 4, 2012 on the consolidated mineral resources for the Twin Metals Minnesota Project deposit prepared by AMEC E&C Services Inc. The study reported that contained metals (using a 0.3% Cu cut-off) of 13.7 billion lbs copper, 4.4 billion lbs nickel, and 21.2 million ozs palladium+platinum+gold (TPM) in the Indicated category and 11.8 billion lbs copper, 4.0 billion lbs nickel, and 12.8 million ozs TPM in the Inferred category, representing an average 19% increase from the June 2012 interim AMEC Report.
Duluth Metals wishes to clarify the statement made with respect to the Inferred Mineral Resource of 1.26 billion tons on the Birch Lake, Maturi and Spruce Road deposits as representing "a 9% increase in Inferred Tons" from the June 2012 interim AMEC Report. While the Indicated Mineral Resource Tons did indeed increase by approximately 60%, the statement with respect to Inferred Tons should have read "an 8% decrease in Inferred Tons from the June 2012 interim report".
About Duluth Metals Limited
Duluth Metals is committed to acquiring, exploring and developing copper, nickel and platinum group metal (PGM) deposits. Duluth Metals has a joint venture with Antofagasta plc on the Twin Metals Project, located within the rapidly emerging Duluth Complex mining camp in north-eastern Minnesota. The Duluth Complex hosts one of the world's largest undeveloped repositories of copper, nickel and PGMs, including the world's third largest accumulation of nickel sulphides, and one of the world's largest accumulations of polymetallic copper and platinum group metals. Aside from the joint venture, Duluth Metals retains a 100% position on approximately 40,000 acres of mineral interests on exploration properties adjacent to and nearby the Twin Metals Minnesota LLC joint venture.
About Twin Metals Minnesota LLC
Twin Metals Minnesota, LLC, is a joint venture company, 60 percent owned by Duluth Metals Limited and 40 percent by Antofagasta plc. Twin Metals was formed in 2010 to pursue the development and operation of a copper, nickel and platinum group metals (strategic metals) underground mining project within the Duluth Complex in northeastern Minnesota. Twin Metals holds mineral and land assets of approximately 32,000 acres of leased and permitted land, including mineral resources prepared in compliance with the requirements of NI 43-101.
This press release contains forward-looking statements (including "forward-looking information" within the meaning of applicable Canadian securities legislation and "forward-looking statements" within the meaning of the US Private Securities Litigation Reform Act of 1995) relating to, among other things, the results of drilling operations of Duluth Metals and exploration and mine development. Generally, forward-looking statements can be identified by the use of words such as "plans", "expects" or "does not expect", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates" or "does not anticipate", or "believes", or variations of such words and phrases or statements that certain actions, events or results "may", "could", "would", "might" or "will be taken", "occur" or "be achieved". Duluth Metals has relied on a number of assumptions and estimates in making such forward-looking statements, including, without limitation, the prices of copper, nickel and platinum group metals (PGMs) and the costs associated with continuing exploration and mining development. Such assumptions and estimates are made in light of the trends and conditions that are considered to be relevant and reasonable based on information available and the circumstances existing at this time. A number of risk factors may cause actual results, level of activity, performance or outcomes of such exploration and/or mine development to be materially different from those expressed or implied by such forward-looking statements including, without limitation, whether such discoveries will result in commercially viable quantities of such mineralized materials, the possibility of changes to project parameters as plans continue to be refined, the ability to execute planned exploration and future drilling programs, possible variations of copper, nickel and PGM grade or recovery rates, the need for additional funding to continue exploration efforts, changes in general economic, market and business conditions, and those other risks set forth in Duluth Metals' most recent annual information form under the heading "Risk Factors" and in its other public filings. Statements related to "reserves" and "resources" are deemed forward-looking statements as they involve the implied assessment, based on realistically assumed and justifiable technical and economic conditions, that an inventory of mineralization will become economically extractable. Forward-looking statements are not guarantees of future performance and such information is inherently subject to known and unknown risks, uncertainties and other factors that are difficult to predict and may be beyond the control of Duluth Metals. Although Duluth Metals has attempted to identify important risks and factors that could cause actual actions, events or results to differ materially from those described in forward-looking statements, there may be other factors and risks that cause actions, events or results not to be as anticipated, estimated or intended. Consequently, undue reliance should not be placed on such forward-looking statements. In addition, all forward-looking statements in this press release are given as of the date hereof. Duluth Metals disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, save and except as may be required by applicable securities laws. The forward-looking statements contained herein are expressly qualified by this disclaimer.
Cautionary Note to United States Investors Concerning Estimates of Indicated and Inferred Mineral Resources:
This press release uses the terms "Indicated Mineral Resources" and "Inferred Mineral Resources" in accordance with the Canadian Institute of Mining, Metallurgy and Petroleum (CIM) Definition Standards. While such terms are recognized under Canadian securities legislation, the United States Securities and Exchange Commission does not recognize these terms. The term "Inferred Mineral Resource" refers to a mineral resource for which quantity and grade or quality can be estimated on the basis of geological evidence and limited sampling and reasonably assumed, but not verified, geological and grade continuity. These estimates are based on limited information and it cannot be assumed that all or any part of an "Inferred Mineral Resource" will be upgraded to a higher classification resource, such as "Indicated" or "Measured", as a result of continued exploration. Accordingly, an estimate relating to an "Inferred Mineral Resource" is insufficient to allow meaningful application of technical and economic parameters or to enable an evaluation of economic viability. Under Canadian securities legislation, estimates of an "Inferred Mineral Resource" may not form the basis of feasibility or other economic studies. Investors are cautioned not to assume that all or any part of an "Inferred Mineral Resource" is economically or legally mineable. Investors are also cautioned not to assume that all or any part of "Indicated" will ever be converted into "Mineral Reserves" (being the economically mineable part of an "Indicated" or "Measured Mineral Resource").
SOURCE: Duluth Metals Limited
For further information:
Vice President Investor Relations and Corporate Communications
Telephone: (416) 369-1500 ext. 222
Email: [email protected]
Telephone: (651) 389-9990
Email: [email protected]