Asher Intersects Significant Gold Mineralization at King Mine, Nevada, USA

Receives Assays for First 5 of 11 Drill Holes

Drill Hole   KM - 3  3.72 g/t Gold over 25 feet including
    ● 16.00 g/t Gold over 5 feet and;
Drill Hole  KM - 4  3.26 g/t Gold over 30 feet including
    ● 10.45 g/t Gold over 5 feet

TORONTO, Dec. 17, 2013 /CNW/ - Asher Resources Corp. ("Asher" or the "Company") (TSX-V: ACN) is pleased to announce that it has completed its first phase drilling program on the King Mine project located in west central Nevada 10 miles east of the past producing Rawhide gold mine (1,000,000 oz. Au).   The drill program consisted of 11 reverse circulation percussion holes for a total of 7,170 feet (2,186 meters).  Assays have been received for the first five holes and highlights include:

Drill Hole From To Interval Au Ag   Cu Pb Zn
  Ft Ft Ft g/t g/t   ppm ppm  ppm
KM - 3     40 65 25 3.72 7.1   236 317 814
Including     60 65 5 16.00 31.5   902 1490 1325
KM - 4     70 100 30 3.26 5.8   524 134 625
Including     80 85 10.45 5.9   891 94 1390

"Our drill program is the first carried out on this promising Nevada project and we are very pleased with these initial results to date. The drill program started from the outer and weaker portions of the chargeability anomalies working towards the higher chargeability targets. Holes KM-3 and KM-4, which are the nearest holes to the higher chargeability target have intersected significant gold mineralization. We now look forward to reporting assay results from the remaining holes, some of which test the high chargeability zone" commented Richard Buzbuzian, President and CEO.

See 'Chargeability Contour Map with RC Drill Hole Locations' here:

The program was designed to test a large induced polarization, chargeability, anomaly defined over a length of 1,100 meters (3,600 feet) and width of 400 meters (1,300 feet) and to test gold bearing structures on the margin of the main IP anomaly.

Significant results were obtained in drill holes KM - 3 and KM - 4 with KM - 3 returning  3.72 g/t Au over 25 feet and KM - 4 returning 3.26 g/t Au over 30 feet.  Drill holes KM - 1 and KM - 2 targeted gold bearing structures on the northern end of the IP anomaly with reported assays up to 55.7 g/t Au in surface grab samples.  Drill hole KM- 5 was drilled to test a weaker chargeability zone on the west side of the anomalous area.  Drilling returned abundant disseminated pyrite but minimal gold values.

Drill Hole   From  To  Interval Au Ag   Cu Pb Zn
     Ft Ft  Ft g/t g/t   ppm ppm ppm
KM - 1    465 475 10 0.32 < 0.2   24 9 102
KM - 2   365 375 10 0.31 2.2   291 57 5220
KM - 3   40 65 25 3.72 7.1   236 317 814
Including     60 65 5 16.00 31.5   902 1490 1325
  215 225 10 0.81 20.6   2115 5170 6720
  370 385 15 0.88 1.1   3 45 112 8527
  405 425 20 0.19 1.1   53 225 388
KM - 4   70 100 30 3.26 5.8   524 134 625
Including     80 85 5 10.45 5.9   891 94 1390
KM - 5   260 275 15 0.27 < 0.2   61 9 90

Note: Recorded in the tables above are footage lengths only. True width is indeterminable at this time.

The subsurface IP/chargeability anomaly is well defined and forms an elliptical zone with a dominant eastern side.   Rock sampling results ranged from 0.23 g/t Au to 55.7 g/t Au above a 0.20 g/t Au cut-off and conforms to historic sampling (2002) which had a high value of 28.56 g/t Au over a 1.83 m chip sample. Within the chargeability zone, geological mapping has delineated a strong hydrothermal overprint on diorite to andesite host rocks with areas of intense phyllic (quartz-sericite-pyrite) to potassic style silicification, which carries the anomalous gold values. To date, the deposit model, based on geology, anomalous gold values associated with silicified zones, anomalous copper correlated with the gold values, and geophysical signature, suggests spatially related, porphyry copper - gold setting with potential for a near surface zone of gold mineralization and potential for a deeper porphyry style gold-copper deposit.

Drill samples were collected at five foot intervals from a wet rotary splitter and bagged with sample interval noted at the drill site.  The bagged samples were collected at the site by ALS minerals transportation department who established a documented chain of custody.  Samples were taken to ALS Minerals sample preparation laboratory in Elko Nevada where they were high temperature dried, crushed and pulverized to produce a minus -75 micron, 250 gram pulp for analysis.  Sample pulps were then shipped by air to Vancouver, Canada, where they were analyzed for gold using the fire assay and atomic absorption finish method on a 30 gram aliquot with a reporting limit of 0.005 ppm.  Multi-element analysis was performed on a 5 gram aliquot which reports 35 elements using an aqua regia digestion and ICP-AES analysis.  Sample duplicates were inserted at the drill site and ALS Minerals uses strict IOS protocols for quality control.  Sample results are transmitted to assigned Asher personnel by internet.

The technical information contained in this news release has been verified and approved by Asher's Chief Geologist, Paul Mattinen, a designated AIPG-CPG "Qualified Person" for the purpose of National Instrument 43-101, Standards of Disclosure for Mineral Projects of the Canadian Securities Administrators.

Additional information can be found at

About Asher Resources:

Asher Resources Corporation is a gold exploration company headquartered in Toronto, Ontario, with a regional office in Reno Nevada.  Asher's mission is to discover and develop high quality North American precious metal assets with its current focus in southern BC and the Nevada Great Basin.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

The forward-looking information contained in this press release is made as of the date hereof and Asher undertakes no obligation to update publicly or revise any forward-looking information, whether as a result of new information, future events or otherwise, unless so required by applicable securities laws.

This news release does not constitute an offer to sell or a solicitation of an offer to sell any securities in the United States. The securities have not been and will not be registered under the United States Securities Act of 1933, as amended (the "U.S. Securities Act") or any state securities laws and may not be offered or sold within the United States or to U.S. Persons unless registered under the U.S. Securities Act and applicable state securities laws or an exemption from such registration is available.




PDF available at:

SOURCE: Asher Resources Corporation

For further information:

Please contact Richard Buzbuzian at:

Telephone: (416) 361-6167 ext. 237


Profil de l'entreprise

Asher Resources Corporation

Renseignements sur cet organisme


Jetez un coup d’œil sur nos forfaits personnalisés ou créez le vôtre selon vos besoins de communication particuliers.

Commencez dès aujourd'hui .


Remplissez un formulaire d'adhésion à CNW ou communiquez avec nous au 1-877-269-7890.


Demandez plus d'informations sur les produits et services de CNW ou communiquez avec nous au 1‑877-269-7890.