Sarama Resources Doubles the Strike Length of Mineralisation at the Mm Prospect to 3.8km

TSX-V Ticker: SWA

VANCOUVER, June 27, 2013 /CNW/ - Sarama Resources Limited ("Sarama" or the "Company") is pleased to report that recent extensional drilling at its South Houndé Project in south-western Burkina Faso has extended the strike length of mineralisation at the MM Prospect to 3.8km, doubling the strike length defined previously.


  • Strike length of mineralisation extended to 3.8km, double the extent defined previously.
  • Mineralised quartz-feldspar-porphyry units intersected by the drilling show a high degree of geological continuity and geometrical consistency.
  • Drilling indicates the presence of higher-grade shoot controls, within the overall lower-grade extended mineralisation, illustrating down-dip exploration potential.
  • Downhole intersection highlights from diamond and reverse-circulation ("RC") drilling include:
                        FRC666RE1 (diamond)     17.2m @ 3.14 g/t Au     from 161.3m      
                        FRC661 (RC)     9.0m @ 3.57 g/t Au     from 114.0m     including 6.0m @ 5.12 g/t Au
                        FRC662 (RC)     26.0m @ 1.84 g/t Au     from 28.0m     including 14.0m @ 2.33 g/t Au; and
                                          including 4.0m @ 3.22 g/t Au
                        FRC686 (RC)     28.0m @ 1.68 g/t Au     from 68.0m      
                        FRC668 (RC)     22.0m @ 1.89 g/t Au     from 39.0m      
                        FRC665 (RC)     17.0m @ 1.98 g/t Au     from 16.0m      
                        FRC681RE1 (diamond)     22.3m @ 1.60 g/t Au     from 129.4m      
                        FRC813 (RC)     26.0m @ 1.38 g/t Au     from 16.0m     including 10.0m @ 2.00 g/t Au
  • Maiden mineral resource estimate expected to be complete in Q3 2013.

Sarama has received assay results from recent diamond, RC and air-core ("AC") drilling programs at the MM Prospect which is situated on the Tankoro exploration property within the Company's South Houndé Project. The extensional programs commenced in Q1 2013 and assay results for 1,400m of diamond drilling (14 holes), 4,900m of RC drilling (43 holes, including 4 pre-collars) and 1,500m of AC drilling (34 holes) are listed in Appendices A, B and C respectively.

The drilling programs were designed as a first-pass test for a southerly strike extension to the high-grade mineralisation defined at the MM Prospect by previous drilling.  An induced-polarisation geophysical survey conducted over the target area by Sarama in late 2012 identified resistivity and chargeability anomalies which were interpreted to be mineralised quartz-feldspar-porphyry dykes similar to the units hosting the high-grade mineralisation to the north.

Mineralisation extending to a vertical depth of approximately 150m, considered to be potentially amenable to open pit mining, was the main focus of the drilling which was conducted on east-west lines spaced approximately 110-120m along strike.  Holes were spaced at 40-60m centres down-dip.

The drilling delineated a series of parallel quartz-feldspar-porphyry dykes, interpreted to be striking north-north-east and dipping steeply to the west.  This geometry is similar to the mineralised system immediately to the north, resulting in a strike length extension of 1.9km and bringing the total continuously mineralised strike length to 3.8km (refer Figure 1).

Whilst the dyke system in the southern extension area appears to consist largely of low grade mineralisation and is less geologically complex, with fewer parallel lenses, than is characteristic of the system's northern extent, a series of higher-grade shoots present legitimate targets for future exploration (refer Figures 2 and 3).

The southern extension of the MM Prospect, when combined with the 1.9km-long Phantom Prospect to the north, results in mineralisation being intersected over a semi-continuous strike length of 5.7km.  This begins to demonstrate the potential for a mineralised system of significance and underscores the prospectivity of the 30km-long Tankoro Structural Corridor as defined by earlier desktop studies and soil geochemistry fieldwork.

With the completion of the programs at the MM Prospect, Sarama is now focussing on the evaluation of shallow, high-grade mineralisation intersected approximately 400m to the east, at the MM East Prospect.  The Company anticipates this additional area will contribute to the estimation of a maiden resource estimate in Q3 2013.

Sarama's President and CEO, Andrew Dinning commented:

"We are pleased with the results of the drilling programs which have delineated continuous mineralisation over a 3.8km strike length at the MM Prospect, highlighting the size of the mineralised system and the success of our ground-based geophysical surveys in generating drill targets. 

We look forward to the planned release of the maiden resource estimate in Q3 2013 and expect that the results will assist exploration planning to further investigate the nature of the higher-grade shoot controls which are evident throughout the system.

Sarama is well funded with a cash balance of approximately US$11M (unaudited as at 31 March 2013)."

About Sarama Resources Ltd
Sarama Resources Ltd is a Canadian company with a focus on the exploration and development of gold deposits in West Africa.  The board of directors and management team, a majority of whom are founders of the Company, are seasoned resource industry professionals with extensive experience in the exploration and development of world-class gold projects in Africa.

The South Houndé Project in south-west Burkina Faso is the Company's flagship property and is currently the focus of an aggressive exploration program to increase the size of its maiden discovery and to test gold-in-soil anomalies located in a 30km-long structural corridor.  Recent drilling programs at the South Houndé Project have intersected significant mineralisation in several prospect areas which the Company is actively following up.  The Company has built substantial early stage exploration landholdings in prospective and underexplored areas of Burkina Faso (>3,300 km²), Liberia (>880 km²) and Mali (>560 km²) and is aggressively exploring across the property portfolio in Burkina Faso and Liberia.

Figure 1:    Recent Extensional Drilling at South of MM Prospect

Figure 2:    Southern MM Prospect Cross Section - 1175350mN

Figure 3:    Southern MM Prospect Cross Section - 1175050mN

Caution Regarding Forward Looking Statements
Information in this news release that is not a statement of historical fact constitutes forward-looking information.  Such forward-looking information includes statements regarding the Company's planned exploration programs and maiden resource estimate.  Actual results, performance or achievements of the Company may vary from the results suggested by such forward-looking statements due to known and unknown risks, uncertainties and other factors. Such factors include, among others, that the business of exploration for gold and other precious minerals involves a high degree of risk and is highly speculative in nature; few properties that are explored are ultimately developed into producing mines; geological factors; the actual results of current and future exploration; changes in project parameters as plans continue to be evaluated, as well as those factors disclosed in the Company's publicly filed documents.

There can be no assurance that any mineralisation that is discovered will be proven to be economic, or that future required regulatory licensing or approvals will be obtained. However, the Company believes that the assumptions and expectations reflected in the forward-looking information are reasonable. Assumptions have been made regarding, among other things, the Company's ability to carry on its exploration activities, the sufficiency of funding, the timely receipt of required approvals, the price of gold and other precious metals, that the Company will not be affected by adverse political events, the ability of the Company to operate in a safe, efficient and effective manner and the ability of the Company to obtain further financing as and when required and on reasonable terms. Readers should not place undue reliance on forward-looking information.

Sarama does not undertake to update any forward-looking information, except as required by applicable laws.

Notes -Drilling
Drilling results are quoted as downhole intersections.  True mineralisation width is approximately 70% to 80% of intersection length for holes drilled on east-west sections, dipping at -50° to -55° and intersecting the NNE striking lenses.

The reported composites for diamond, RC and AC drilling were determined using a cut-off grade of 0.30g/t Au to select significant and anomalous intersections, with a maximum of 2m internal dilution being incorporated into the composite where appropriate.  No top-cuts were applied to assay grades.  Isolated mineralised intersections less than 2m in length have not been reported.

Sarama undertakes geological sampling and assays in accordance with its QA/QC program which includes the use of certified reference materials for diamond, RC and AC drilling and duplicates in the case of RC drilling.

Gold assays for the RC and diamond drilling were undertaken by the SGS S.A. laboratories in Morila, Mali and Ouagadougou, Burkina Faso, whilst gold assays for the AC drilling were undertaken by the SGS S.A. laboratory in Morila, Mali and the ALS Minerals laboratory in Ouagadougou, Burkina Faso.  Assays are determined by fire assay methods using a 50 gram charge, lead collection and an AAS finish with a 0.01g/t Au lower detection limit.

RC drilling was generally designed using west-east oriented holes, dipping at -50° to -55° to the east, approximately 100-130m in length.  Holes were spaced approximately 40-60m apart along the drill lines.  RC drill cuttings were sampled over regular 1m intervals.

Diamond drilling was generally designed using west-east oriented holes, dipping at -50° to -55° to the east, of variable length.  Holes were spaced approximately 40-60m apart along the drill lines.  Diamond core was logged and sampled according to geological intervals.  Samples submitted for assay were half core.

AC drilling was generally designed using west-east oriented holes, dipping at -55° to the east, approximately 50m in length.  AC drilling proceeded to design or cutting head refusal.  Holes were spaced approximately 40-60m apart along the drill lines.  AC drill cuttings were sampled over regular 2m composited intervals.

Qualified Person's Statement
Scientific or technical information in this news release that relates to the Company's exploration activities in Burkina Faso is based on information compiled or approved by Michel Mercier.  Michel Mercier is an employee of Sarama Resources Ltd and is a member in good standing of the Ordre des Géologues du Québec and has sufficient experience which is relevant to the commodity, style of mineralisation under consideration and activity which he is undertaking to qualify as a Qualified Person under National Instrument 43-101.  Michel Mercier consents to the inclusion in this report of the information, in the form and context in which it appears.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.






SOURCE: Sarama Resources Limited

For further information:

For further information on the Company's activities, please contact:

Andrew Dinning or Paul Schmiede
telephone: +61 8 9363 7600

Profil de l'entreprise

Sarama Resources Limited

Renseignements sur cet organisme


Jetez un coup d’œil sur nos forfaits personnalisés ou créez le vôtre selon vos besoins de communication particuliers.

Commencez dès aujourd'hui .


Remplissez un formulaire d'adhésion à CNW ou communiquez avec nous au 1-877-269-7890.


Demandez plus d'informations sur les produits et services de CNW ou communiquez avec nous au 1‑877-269-7890.