Argex results of TiO(2) grade sensitivity analysis demonstrate improved project economics

  • Increased feedstock grade significantly increases TiO2 output tonnage
  • Increased feedstock grade significantly decreases opex per tonne of TiO2 production

MONTREAL, June 5, 2012 /CNW Telbec/ - Argex Mining Inc. ("Argex") (TSXV: RGX) (FSE: ASV) (OTCBB: ARGEF) is pleased to report the results of a TiO2 grade sensitivity study. The objective of the study was to evaluate the impact of different TiO2 grades of ilmenite feedstock on the operational parameters of the CTL hydrometallurgical process. The internal study was completed in collaboration with BBA Inc. of Montreal, Quebec.

Three different raw material scenarios were considered for the sensitivity analysis with TiO2 grade ranging from 32.0% to 53.9% and Fe/Ti ratio ranging from 2.2 to 1.0. The results of the sensitivity analysis are reported in relative percent terms compared to a reference scenario which is based on the operational parameters for the production of TiO2 pigment using a raw material similar in composition to the mineralization outlined at Argex's La Blache property (TiO2 grade of 18.9% and Fe/Ti ratio of 3.9). The operational parameters considered in the study include raw material input tonnage, TiO2 pigment output tonnage, plant capital expenditures (capex), and plant operational expenditures (opex) per tonne of TiO2 produced. It was assumed for the purpose of the study that the selected feedstock for each of the scenarios was purchased from a third-party supplier, with the purchase and associated transportation costs not factored into the study. Credits for Fe2O3, V2O5 or others by-products were also not taken into consideration for the opex parameter of the sensitivity analysis.

                     
Feedstock Scenarios   Sensitivity vs. Base Case Scenario*
TiO2 Grade   Fe/Ti Ratio   Raw Material Input
Tonnage
  TiO2 Output
Tonnage
  Opex
(per tonne of TiO2 produced)
  Capex
(for one industrial module)
32.0%   2.2   + 5%   + 78%   - 46%   + 7%
47.0%   1.1   + 40%   + 248%   - 64%   + 16%
53.9%   1.0   + 43%   + 309%   - 69%   + 22%
* Base case scenario considers raw material grading 18.9% TiO2 with Fe/Ti ratio of 3.9.


The sensitivity analysis is based on the production of TiO2 pigment from a conceptual hydrometallurgical plant based on the CTL process with capacity corresponding to the size of one industrial module as it is envisioned. The production capacity of one industrial module is defined by the size of the acid regeneration units, which was fixed at 58,000 tonnes of Fe2O3 per year and corresponds to two pyrohydrolysis units capable of processing a total of 36 cubic meters per hour of iron chloride solution. The capex of the hydrometallurgical plant was adjusted for each scenario based on the equipment required to handle different production levels of TiO2 pigment. Operating cost assumptions are unchanged from the La Blache PEA unless noted otherwise. Finishing and coating equipment capex and opex were excluded from the analysis. The costs for electricity and natural gas were set to $0.048 per kWh and $5.50 per million Btu, respectively.

Argex President and CEO, Roy Bonnell, commented on the results of the sensitivity study. "The internal analysis, completed with BBA, demonstrates improved project economics by using higher TiO2 grade feedstock for the CTL process. These promising results, demonstrate not only the important value-added that the acquisition of the Lac Brûlé property represents, but also why we have initiated preliminary testing of selected third-party ilmenite concentrates in order to determine the optimal feedstock specifications to maximize the profitability of the process."

"The internal study shows that an increase in the TiO2 grade of the feedstock significantly lowers the operating cost per unit of TiO2 produced," said Enrico Di Cesare, COO and V-P Technology of Argex. "With a similar capital investment, we could increase potential revenues by more than three times and reduce our operating expenses per tonne of TiO2 produced by close to 70%. Furthermore, because of the fixed quantities of iron that an industrial module can process due to equipment constraints, results show that lower iron content in feedstock allows the company to process a larger amount of raw material."

About Argex Mining Inc.

ARGEX MINING INC. is a near-term producer of commodities that the world needs: Titanium Dioxide, Iron and Vanadium Pentoxide. With a primary goal of advancing rapidly towards production, Argex has adopted a simple and low-risk strategy for the scale-up of its proprietary process that allows it to produce high purity TiO2 directly from run-of-mine material from its 100% owned deposit.

The process is running continuously at the mini-plant in Mississauga, Ontario. The closed-loop process is environmentally friendly and produces minimal inert tailings.

Additionally, the Company owns 100% of the Mouchalagane property, which is a large Labrador Trough iron ore property that represents further potential upside for the Argex shareholders.

Forward-Looking Statements and Disclaimer

This press release may contain forward-looking information within the meaning of applicable securities laws.  All information and statements other than statements of historical facts contained in this press release are forward-looking information.  Such statements and information may be identified by words such as "about", "approximately", "may", "believes", "expects", "will", "intends", "should", "plans", "predicts", "potential", "projects", "anticipates", "estimates", "continues" or similar words or the negative thereof or other comparable terminology.  Forward-looking statements are based on the best estimates available to Argex at this time and involve known and unknown risks, uncertainties and other factors that may cause Argex's actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements.  A description of the risks affecting Argex's business and activities appears under the heading "Risk Factors" in Argex's Amended and Restated Annual Information Form dated January 14, 2011 for the fiscal year ended December 31, 2009, which is available on SEDAR at www.sedar.com.  No assurance can be given that any events anticipated by the forward-looking information in this press release will transpire or occur, or if any of them do so, what benefits that Argex will derive therefrom. In particular, no assurance can be given as to the future financial performance of Argex.  The forward-looking information contained in this press release is made as of the date hereof and Argex undertakes no obligation to publicly update such forward-looking information to reflect new information, subsequent or otherwise, unless required by applicable securities laws.  The reader is warned against placing undue reliance on these forward-looking statements.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

SOURCE ARGEX MINING INC.

For further information:

Roy Bonnell, President and Chief Executive Officer
Argex Mining Inc.
514 788-8923
roy@argex.ca 

Argex Mining Inc.
TSX-V: RGX
FSE: ASV
OTCBB: ARGEF

INVESTOR RELATIONS:
Dave Burwell
The Howard Group
1-888-221-0915
dave@howardgroupinc.com

MEDIA:
Sarah Moreau, Consultant, Financial & Regulatory Affairs
H+K Strategies
514 395-0375, ext.234
sarah.moreau@hkstrategies.ca

Profil de l'entreprise

ARGEX MINING INC.

Renseignements sur cet organisme


FORFAITS PERSONNALISÉS

Jetez un coup d’œil sur nos forfaits personnalisés ou créez le vôtre selon vos besoins de communication particuliers.

Commencez dès aujourd'hui .

ADHÉSION À CNW

Remplissez un formulaire d'adhésion à CNW ou communiquez avec nous au 1-877-269-7890.

RENSEIGNEZ-VOUS SUR LES SERVICES DE CNW

Demandez plus d'informations sur les produits et services de CNW ou communiquez avec nous au 1‑877-269-7890.