SilverCrest Announces Additional High Grade Underground Results At Las Chispas; Commencement of Surface Drilling Program

TSX-V: SIL

VANCOUVER, April 28, 2016 /CNW/ - SilverCrest Metals Inc. ("SilverCrest" or the "Company") is pleased to announce additional results from the underground channel sampling program and the commencement of a surface drilling program at its Las Chispas Project ("Las Chispas") located in Sonora, Mexico, as previously announced on March 2, 2016. Las Chispas is in a prolific mining area with nearby precious metal producers. Historical reports indicate the presence of 14 veins in the district of which only three (Las Chispas, William Tell and Babicanora) have been previously mined extensively in the early 1900s, but none of which appear to have been drilled.

(Photo: http://photos.prnewswire.com/prnh/20160428/361062 )

N. Eric Fier, CPG, P.Eng, President & CEO stated, "We continue to systematically complete our planned underground rehabilitation program at Las Chispas to evaluate areas of known high grade silver-gold mineralization. To date, we have accessed two kilometres of the estimated six kilometres of underground workings. Our first detailed underground channel sampling, as reported below, indicates continuous high grade areas that are easily accessible for potential future mining. In late March, we also commenced a surface drilling program to test extensions of known mineralized veins for potential new discoveries. For the next three months, we will be focusing on continually accessing historical underground workings to assess further high grade continuous mineralization." 

Underground Rehabilitation Update

In an effort to start confirming continuity of underground high grade potential at Las Chispas, 36 continuous channel samples were collected at intervals  about every 2.1 metres across the width of the vein for approximately 75 metres. This location at the William Tell Vein is easily accessible (see attached Figure). Based on historic information, this vein has an estimated 1 kilometre strike length, can be projected to a depth of 300 metres, and has an average width of 1.5 metres.  Sample results averaged 1.1 metres of 2.4 gpt gold and 174.9 gpt silver, or 358.1 gpt silver equivalent* (uncut, undiluted) over a 75 metre strike length. The following table summarizes the 17 most significant results of the 36 samples collected;

William Tell Vein

Sample Type

True Width (m)

Au gpt

Ag gpt

AgEq gpt*

Channel

0.9

24.5

780.0

2,617.5

Channel

0.5

2.0

193.0

341.9

Channel

0.9

2.4

126.0

304.5

Channel

1.1

7.5

116.0

678.5

Channel

0.6

0.1

356.0

361.3

Channel

0.7

6.0

419.0

869.8

Channel

0.7

2.2

188.0

350.0

Channel

1.1

7.4

284.0

842.0

Channel

0.8

3.7

160.0

433.8

Channel

1.2

1.8

225.0

359.3

Channel

0.5

2.5

453.9

640.5

Channel

1.2

0.7

267.0

316.6

Channel

1.2

1.3

327.0

421.9

Channel

0.6

8.5

345.0

984.8

Channel

1.6

1.5

441.0

553.1

Channel

1.2

5.8

84.0

517.5

Channel

0.8

7.9

560.0

1,150.3

*AgEq based on 75:1 Au:Ag

All assays were completed by ALS Chemex in Hermosillo, Mexico and North Vancouver, BC.

The initial geochemical signature at Las Chispas is Ag-Au-Sb-Ba-Mn-Ca indicating a low to intermediate sulphidation epithermal system. Initial geochemical test results suggest that the veins at Las Chispas may be similar to both nearby producing Santa Elena and Mercedes deposits.

Surface Drilling Update

Concurrent with the underground rehabilitation, a surface drilling program of approximately 3,000 metres commenced in late March. To date, six holes have been completed for a total of 1,500 metres. This initial drill program is designed to test known mineralization, extensions of mineralization and the potential for new discoveries.  All holes have intersected quartz stockwork and veining that are currently being logged and sampled. Upon receipt of assays, the results will be announced and integrated with the underground information.

The Company has applied for a MIA (Environmental Impact Statement) for an underground drilling program of 2,000 metres to test potential near-surface resource areas and deeper extensional targets of below the historical workings. Minimal underground work is required to begin underground drilling. Depending on permitting, this program is expected to start in the second half of 2016. This permit also includes the extraction of a 100,000-tonne bulk sample for testing and processing off site.

The Qualified Person under National Instrument 43-101 Standards of Disclosure for Mineral Projects for this news release is N. Eric Fier, CPG, P.Eng, and President and CEO for SilverCrest, who has reviewed and approved its contents.

ABOUT SILVERCREST METALS INC.
SilverCrest is a Canadian precious metals exploration company headquartered in Vancouver, BC, that is focused on new discoveries, value-added acquisitions and targeting production in Mexico's historic precious metal districts. The Company is led by a proven management team in all aspects of the precious metal mining sector, including the pioneering of a responsible "phased approach" business model taking projects through discovery, finance, on time and on budget construction, and production with subsequent increased value to shareholders.  

FORWARD-LOOKING STATEMENTS 
This news release contains "forward-looking statements" within the meaning of Canadian securities legislation. These include, without limitation, statements with respect to: the strategic plans, timing and expectations for the Company's exploration, rehabilitation and drilling programs of the Las Chispas Project; information with respect to high grade areas and size of veins projected from underground sampling results; and the accessibility of future mining at the Las Chispas Project. Such forward‑looking statements or information are based on a number of assumptions, which may prove to be incorrect. Assumptions have been made regarding, among other things: the conditions in general economic and financial markets; availability of skilled labour; timing and amount of expenditures related to rehabilitation and drilling programs; and effects of regulation by governmental agencies. The actual results could differ materially from those anticipated in these forward-looking statements as a result of risk factors including: the timing and content of work programs; results of exploration activities; the interpretation of drilling results and other geological data; receipt, maintenance and security of permits and mineral property titles; environmental and other regulatory risks; project cost overruns or unanticipated costs and expenses; and general market and industry conditions. Forward-looking statements are based on the expectations and opinions of the Company's management on the date the statements are made. The assumptions used in the preparation of such statements, although considered reasonable at the time of preparation, may prove to be imprecise and, as such, readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date the statements were made. The Company undertakes no obligation to update or revise any forward-looking statements included in this news release if these beliefs, estimates and opinions or other circumstances should change, except as otherwise required by applicable law.

N. Eric Fier, CPG, P.Eng
President & CEO
SilverCrest Metals Inc.

Neither TSX Venture Exchange nor its Regulation Services Provider (as defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

SOURCE SilverCrest Metals Inc.

Image with caption: "SilverCrest Metals Las Chispas Project 3d view (CNW Group/SilverCrest Metals Inc.)". Image available at: http://photos.newswire.ca/images/download/20160428_C2684_PHOTO_EN_677284.jpg

For further information: SilverCrest Metals Inc., Contact: Fred Cooper, Investor Relations, Telephone: +1 (604) 694-1730, Fax: +1 (604) 694-1761, Toll Free: 1-866-691-1730 (Canada & USA), Email: info@silvercrestmetals.com, Website: www.silvercrestmetals.com, 570 Granville Street, Suite 501, Vancouver, British Columbia V6C 3P1

RELATED LINKS
www.silvercrestmetals.com

Custom Packages

Browse our custom packages or build your own to meet your unique communications needs.

Start today.

CNW Membership

Fill out a CNW membership form or contact us at 1 (877) 269-7890

Learn about CNW services

Request more information about CNW products and services or call us at 1 (877) 269-7890