BGM intersects 9.34 g/t Au over 5.40 metres at Island Mountain

TORONTO, March 16, 2017 /CNW/ - Barkerville Gold Mines Ltd. (TSXV: BGM) (the "Company" or "Barkerville") is pleased to announce additional results from the ongoing 130,000 metre Phase II Island Mountain exploration drilling program at the Company's flagship Cariboo Gold Project.  The Company is currently exploring and delineating Island Mountain with seven drill rigs and has now relocated an eighth rig to the Valley Zone which occurs between Cow and Island Mountains.  Detailed drilling results, a drill hole location plan map, vertical and long section are presented at the end of this release.

New Mosquito Creek Veining Occurrences

Phase II exploratory step out drilling 100 metres along strike to the northwest of the former Mosquito Creek Mine intersected a new occurrence of auriferous veining as defined by drillhole IM-17-032 which intersected 12.19 g/t Au over 3.60 metres at a vertical depth of 50 metres below surface. Deeper occurrences of new veining were also encountered in the largely untested area between the former Aurum and Mosquito Creek Mines by drillholes IM-17-026 and IM-17-028 which intersected 6.51 g/t Au over 4.70 metres and 14.35 g/t Au over 2.30 metres respectively. These new occurrences remain open for expansion in all directions and drilling is presently testing the lateral and depth extensions of these new occurrences.

Aurum Shaft Zone Continues to Expand

Footwall to the former Aurum Mine, 280 metres southeast of the Aurum Shaft, drillhole IM-17-033 intersected previously unidentified veining averaging 7.84 g/t Au over 3.80 metres at a vertical depth of 40 metres below surface. No historical drillholes occur within a 100 metre radius of this new occurrence and it remains open for expansion in all directions.  

Extensions to previously reported veining from prior exploratory drilling now referred to as the Shaft Zone were demonstrated by drillhole IM-17-027 which intersected new veining 280 metres below surface grading 9.34 g/t Au over 5.40 metres. Averaging 19.71 g/t Au over 2.25 metres and 14.72 g/t Au over 2.50 metres drillhole IM-17-025 intersected two separate vein systems at 40 and 190 metres vertically below surface respectively. IM-17-031 also intersected further veining in the Shaft Zone grading 22.36 g/t Au over 2.00 metres and 9.68 g/t Au over 4.60 metres.

About the Phase II Program

The 130,000 metre 2017 Phase II exploratory and delineation drill program on Island Mountain is intended to determine the extent of the vein systems that were historically never explored, and is aimed at discovering new vein systems and sulphide replacement bodies that will ultimately inform a maiden resource. Seven drill rigs are currently operating on Island Mountain, with an eighth rig testing for additional mineralization below the former Aurum and Cariboo Gold Quartz Mines which have never been explored since mining operations ceased circa 1960.

Qualified Persons

Exploration activities at the Cariboo Gold Project are administered on site by the Company's Exploration Manager, Maggie Layman, P.Geo. As per National Instrument 43-101 Standards of Disclosure for Mineral Projects, Paul Geddes, P.Geo. Vice President Exploration, is the Qualified Person for the Company and has prepared, validated and approved the technical and scientific content of this news release. The Company strictly adheres to CIM Best Practices Guidelines in conducting, documenting, and reporting its exploration activities on the Cariboo Gold Project.

Quality Assurance – Quality Control

Once received from the drill and processed, all drill core samples are sawn in half, labelled and bagged.  The remaining drill core is subsequently stored on site at the Company's secure facility in Wells, BC.  Numbered security tags are applied to lab shipments for chain of custody requirements.  The Company inserts quality control (QC) samples at regular intervals in the sample stream, including blanks and reference materials with all sample shipments to monitor laboratory performance. The QAQC program was designed and approved by Lynda Bloom, P.Geo. of Analytical Solutions Ltd., and is overseen by the Company's Qualified Person, Paul Geddes, P.Geo, Vice President Exploration.

Drill core samples are submitted to ALS Geochemistry's analytical facility in North Vancouver, British Columbia for preparation and analysis. The ALS facility is accredited to the ISO/IEC 17025 standard for gold assays and all analytical methods include quality control materials at set frequencies with established data acceptance criteria. The entire sample is crushed and 250 grams is pulverized. Analysis for gold is by 50g fire assay fusion with atomic absorption (AAS) finish with a lower limit of 0.01 ppm and upper limit of 100 ppm. Samples with gold assays greater than 100 ppm are re-analyzed using a 1,000g screen metallic fire assay. A selected number of samples are also analyzed using a 48 multi-elemental geochemical package by a 4-acid digestion, followed by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) and Inductively Coupled Plasma Mass Spectroscopy (ICP-MS).

About Barkerville Gold Mines Ltd.
The Company is focused on developing its extensive land package located in the historical Cariboo Mining District of central British Columbia. Barkerville's mineral tenures cover 1,164 square kilometres along a strike length of 60 kilometres which includes several past producing hard rock mines of the historic Barkerville Gold Mining Camp near the town of Wells, British Columbia. The QR Project, located approximately 110 kilometres by highway and all weather road from Wells was acquired by Barkerville in 2010 and boasts a fully permitted 900 tonne/day gold milling and tailings facility. Test mining of the Bonanza Ledge open pit was completed in March of 2015 with 91,489 tonnes of ore milled producing 25,464 ounces of gold. The Company has completed a number of drilling and exploration programs over the past 20 years and is currently compiling this data with all historical information in order develop geologic models which will assist new management and provide the framework to continue to explore the Cariboo Gold Project. An extensive drill program is currently underway with the goal of delineating additional high grade gold mineralization.

Cautionary Statement on Forward-Looking Information
Neither the TSX Venture Exchange ('TSXV') nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this release. No stock exchange, securities commission or other regulatory authority has approved or disapproved the information contained herein. This news release contains forward-looking information which is not comprised of historical facts. Forward-looking information involves risks, uncertainties and other factors that could cause actual events, results, performance, prospects and opportunities to differ materially from those expressed or implied by such forward-looking information. Forward looking information in this news release includes, but is not limited to, the Company's objectives, goals or future plans, statements regarding exploration results and exploration plans. Factors that could cause actual results to differ materially from such forward-looking information include, but are not limited to, capital and operating costs varying significantly from estimates, the preliminary nature of metallurgical test results, delays in obtaining or failures to obtain required governmental, environmental or other project approvals, uncertainties relating to the availability and costs of financing needed in the future, changes in equity markets, inflation, fluctuations in commodity prices, delays in the development of projects and the other risks involved in the mineral exploration and development industry, and those risks set out in the Company's public documents filed on SEDAR. Although the Company believes that the assumptions and factors used in preparing the forward-looking information in this news release are reasonable, undue reliance should not be placed on such information, which only applies as of the date of this news release, and no assurance can be given that such events will occur in the disclosed time frames or at all. The Company disclaims any intention or obligation to update or revise any forward-looking information, whether as a result of new information, future events or otherwise, other than as required by law.

Table 1: Length weighted gold composites for Island Mountain Phase II drillholes:

HOLE-ID

FROM (M)

TO (M)

CORE LENGTH (M)

AU (G/T)

AREA

IM-17-009

107.80

108.65

0.85

2.71

SHAFT

IM-17-017

22.70

24.00

1.30

8.74

SHAFT

IM-17-017

98.00

98.50

0.50

28.90

SHAFT

IM-17-017

145.65

146.80

1.15

10.85

SHAFT

IM-17-021




NSA

SHAFT

IM-17-022

179.50

180.00

0.50

7.80

SHAFT

IM-17-022

230.30

230.80

0.50

25.50

SHAFT

IM-17-022

276.40

284.55

8.15

4.51

SHAFT

INCLUDING

276.90

278.00

1.10

14.20

SHAFT

AND

283.50

284.00

0.50

20.70

SHAFT

IM-17-023

69.70

70.20

0.50

13.65

SHAFT

IM-17-023

89.05

90.20

1.15

6.36

SHAFT

IM-17-024

104.35

105.50

1.15

4.28

SHAFT

IM-17-025

36.55

37.90

1.35

5.73

SHAFT

IM-17-025

54.90

56.20

1.30

5.24

SHAFT

IM-17-025

114.50

116.75

2.25

19.71

SHAFT

IM-17-025

115.75

116.25

0.50

81.60

SHAFT

IM-17-025

224.00

224.70

0.70

11.45

SHAFT

IM-17-025

284.00

286.50

2.50

14.72

SHAFT

INCLUDING

284.00

284.60

0.60

57.10

SHAFT

IM-17-026

152.20

152.75

0.55

12.00

MC

IM-17-026

410.00

414.70

4.70

6.51

MC

INCLUDING

414.00

414.70

0.70

28.50

MC

IM-17-027

121.20

121.85

0.65

41.00

SHAFT

IM-17-027

243.10

248.50

5.40

9.34

SHAFT

INCLUDING

244.40

245.00

0.60

21.00

SHAFT

AND

246.25

247.25

1.00

32.10

SHAFT

IM-17-028

10.90

11.40

0.50

6.94

MC

IM-17-028

221.30

223.60

2.30

14.35

MC

INCLUDING

221.30

221.90

0.60

32.30

MC

AND

223.10

223.60

0.50

12.35

MC

IM-17-029

113.75

116.00

2.25

9.42

SHAFT

INCLUDING

113.75

114.25

0.50

14.25

SHAFT

AND

114.75

115.50

0.75

18.40

SHAFT

IM-17-029

149.00

149.50

0.50

14.60

SHAFT

IM-17-029

168.95

170.60

1.65

5.85

SHAFT

IM-17-030

103.80

104.30

0.50

15.75

SHAFT

IM-17-030

145.00

146.50

1.50

11.00

SHAFT

IM-17-030

276.00

276.50

0.50

16.10

SHAFT

IM-17-031

95.25

95.75

0.50

13.00

SHAFT

IM-17-031

118.50

119.00

0.50

15.05

SHAFT

IM-17-031

145.00

147.00

2.00

22.36

SHAFT

INCLUDING

145.50

147.00

1.50

29.70

SHAFT

IM-17-031

184.00

185.20

1.20

14.30

SHAFT

IM-17-031

236.40

241.00

4.60

9.68

SHAFT

INCLUDING

238.80

239.30

0.50

86.90

SHAFT

IM-17-031

301.00

302.20

1.20

6.59

SHAFT

IM-17-032

37.40

39.55

2.15

9.47

MC

IM-17-032

48.30

51.90

3.60

12.19

MC

INCLUDING

48.30

49.00

0.70

12.25

MC

AND

49.00

50.15

1.15

29.90

MC

IM-17-032

161.50

162.70

1.20

8.10

MC

IM-17-033

48.25

48.95

0.70

23.00

SHAFT

IM-17-033

101.50

105.30

3.80

7.84

SHAFT

INCLUDING

101.50

102.00

0.50

53.70

SHAFT

IM-17-033

151.75

152.50

0.75

12.95

SHAFT

IM-17-034




ASSAYS PENDING


IM-17-035

291.90

292.50

0.60

6.24

MC

IM-17-035

295.40

296.00

0.60

5.93

MC

IM-17-035

396.85

397.35

0.50

8.89

MC

 

Core lengths are reported as true widths cannot be accurately determined from the information available.  Rock not recovered by drilling was assigned zero grade and not included in the composites. Top cuts have not been applied to high grade assays. NSA – No Significant Assays, Shaft = Shaft Zone, MC = Mosquito Creek.

Table 3: Drillhole Collar Orientations

HOLE-ID

AZIMUTH

DIP

IM-17-009

135.00

-44.30

IM-17-017

139.50

-43.30

IM-17-022

138.10

-44.70

IM-17-023

139.80

-63.50

IM-17-024

142.70

-64.70

IM-17-025

137.70

-43.70

IM-17-026

141.50

-64.30

IM-17-027

141.90

-65.10

IM-17-028

137.80

-63.40

IM-17-029

138.80

-64.40

IM-17-030

141.40

-46.00

IM-17-031

135.80

-44.10

IM-17-032

138.60

-63.70

IM-17-033

139.10

-44.90

IM-17-034

144.20

-64.70

IM-17-035

133.00

-46.10


 



SOURCE Barkerville Gold Mines Ltd.

For further information: on Barkerville Gold Mines Ltd. please contact: Chris Lodder, President & Chief Executive Officer, Suite 400-365 Bay Street, Toronto, Ontario, Canada, clodder@barkervillegold.com

RELATED LINKS
http://www.barkervillegold.com/

Custom Packages

Browse our custom packages or build your own to meet your unique communications needs.

Start today.

CNW Membership

Fill out a CNW membership form or contact us at 1 (877) 269-7890

Learn about CNW services

Request more information about CNW products and services or call us at 1 (877) 269-7890