Fortune Minerals announces pilot plant hydrometallurgy results for the NICO gold-cobalt-bismuth-copper deposit

    Issued Capital: 55,550,107

    Production of high quality metal products proven with improved recoveries

    LONDON, ON, Feb. 24 /CNW Telbec/ - Fortune Minerals Limited (TSX-FT)
("Fortune Minerals" or the "Company") is pleased to announce results of the
downstream hydrometallurgical processing of NICO concentrates from its $5
million pilot plant test recently completed at SGS Lakefield Research Limited
("Lakefield") in Lakefield, Ontario. The pilot plant has successfully proven
the processing of ores from Fortune's 100% owned NICO
gold-cobalt-bismuth-copper deposit in the Northwest Territories to high value
metal products: cobalt and bismuth cathode, gold doré and copper cement.
Notably, the pilot plant has also demonstrated operational improvements,
higher metal recoveries, and production of higher value products than the base
assumptions used in the Company's definitive feasibility study for NICO
completed by Micon International Limited ("Micon") in 2007, and the economic
update in 2008 (see Fortune Minerals news releases, dated May 8, 2008, and
January 16, 2007). Collectively, these improvements are expected to have a
material positive impact on the economics of an already robust project.
    The crushing, grinding and flotation components of the Lakefield pilot
plant to the production of gold-bearing cobalt and bismuth concentrates were
completed earlier in 2008. The operational improvements and higher metal
recoveries for these components of the process flow sheet have already been
announced (see Fortune Minerals news release, dated February 6, 2008). Fortune
Minerals is very pleased to report that the downstream hydrometallurgical
processing of these concentrates to high value metal products has also
produced operational improvements, higher metal recoveries, and proven the
production of higher value metal products than previously reported. A summary
of the results of the downstream hydrometallurgical components of the
Lakefield pilot plant and the improvements over the base assumptions used in
the Micon feasibility study are as follows:

    - Production of gold doré has been proven;
    - Gold recovery from the bismuth concentrate has increased from 94 to
    - Gold recovery from the cleaner float tails has increased from 50 to
    - Gold recovery from the cobalt autoclave residue has been confirmed at
    - Overall pilot plant recovery of blended underground and open pit ores
      to doré was shown to be 73%, confirming the Micon study.
    - Overall pilot plant recovery of average open pit ores to doré increased
      to 62% from 58% used in the Micon study.

    - The production of high grade (99.5% purity) bismuth cathode has been
    - Production of bismuth cathode is a significant operational improvement
      over the Micon study, which assumed the production and sale of bismuth
    - Bismuth recovery from concentrate has increased to 98% from the 90%
      that would have been paid for metal-in-concentrate used in the Micon
    - Operating costs for the production of bismuth and transportation costs
      for the delivery of bismuth to markets will be lower;
    - Overall pilot plant recovery from ore to cathode increased to 72% from
      55% used in the Micon study.

    - Production of UMICORE Grade A (99.8%) cobalt cathode has been proven;
    - The option of producing a cobalt carbonate, grading up to 46% cobalt
      has been proven;
    - Cobalt recovery from concentrate to cathode has decreased from 95 to
    - This 2% lower hydrometallurgical recovery for cobalt in the downstream
      processing is offset by a 5% greater flotation recovery than the
      estimate used in the 2007 Micon study;
    - Overall pilot plant recovery from ore to cathode increased to 83% from
      81% used in the Micon study.

    - Production of a saleable copper cement grading approximately 97% copper
      has been proven;
    - The copper contained in the cobalt concentrate must be removed to
      produce a high quality cobalt cathode and represents an additional by-
      product revenue stream.

    The Lakefield pilot plant was a comprehensive test validating the NICO
process flow sheet from ore to the production of high value metal products.
The pilot plant tested 180 tonnes of NICO ores representing samples of: 1)
blended underground and open pit ores indicative of the first two years of
production from the mine; and 2) average open pit ores indicative of the
remaining 11 years of the mine life at the new proposed 4,650 tonnes per day
production rate. The samples were composites of ores mined during the NICO
underground bulk sampling programs carried out in 2006 and 2007. Fortune
Minerals' process development work is being overseen by Mr. Mike Samuels,
B.Eng., Director of Technical Services and Mr. Tom Rinaldi, B.Sc. Vice
President Operations. The Lakefield pilot plant was conducted under the
supervision of Mr. Alex Mezei, P.Eng., who is the Qualified Person for the
pilot plant work for the purposes of National Instrument 43-101. The pilot
pant was also supported by a number of additional metallurgical experts at
Lakefield as well as an Owner's team of industry metallurgical and process
engineers. Additional test work is underway at Lakefield to support Metsim(R)
modelling of the process flow sheet and Front End Engineering Design ("FEED")
work being conducted by Aker Metals, a division of Aker Solutions Canada Inc.
    Fortune Minerals has completed preliminary trade-off studies assessing
the merits of relocating some of the NICO downstream process facilities to a
location in southern Canada with readily available lower cost power.
Preliminary results of this work have been favourable and indicate an
opportunity for significant capital and operating cost savings for the NICO
project. Fortune is continuing to evaluate this option and determine suitable
locations while it undergoes the permitting process in the Northwest
    NICO is located in the southern part of the Northwest Territories, 160 km
northwest of the City of Yellowknife, 80 km and 50 km northeast of Tlicho
communities of Behchoko and Whati, respectively. The Micon feasibility study
determined that NICO contains total Proven and Probable Mineral Reserves of
21.8 million tonnes, containing 760,000 ounces of gold, 61 million pounds of
cobalt and 77 million pounds of bismuth. The underground portion of the Proven
and Probable Mineral Reserves are 1,204,000 tonnes, grading 5.07 g/t gold,
0.14% cobalt and 0.19% bismuth and the open pit portion of the Proven and
Probable Mineral Reserves are 20,613,000 tonnes, grading 0.85 g/t gold, 0.13%
cobalt and 0.16% bismuth. Copper is produced as a by-product of the process,
but was not included in the Mineral Reserve estimate. The NICO Mineral
Reserves are contained within a larger Mineral Resource. In consideration of
the anticipated lower operating costs as a result of the increased recoveries,
higher value products, and other operational improvements stated above,
Fortune plans to re-estimate the NICO Mineral Reserves after the process
engineering has been completed. Mr. B. Terrence Hennessey, P.Geo. of Micon and
Mr. Eugene Puritch, P.Eng. of P&E Mining Consultants Inc. are the Qualified
Persons responsible for the Mineral Resource and Mineral Reserve estimates in
accordance with National Instrument 43-101. Further information regarding the
NICO mineral reserves and economic studies can be found in the Company's
annual information form and other documents filed on the SEDAR website

    About Fortune Minerals

    Fortune Minerals is a diversified natural resource company with several
mineral deposits and a number of exploration projects, all located in Canada.
They include the Mount Klappan anthracite coal deposits in British Columbia,
and the NICO gold-cobalt-bismuth-copper deposit, the Sue-Dianne copper-silver
deposit and other base and precious metals exploration projects in the
Northwest Territories. Fortune Minerals is focussed on outstanding performance
and growth of shareholder value through assembly and development of high
quality mineral resource projects.

    This press release contains forward-looking information. This
forward-looking information includes, or may be based upon, estimates,
forecasts, and statements as to management's expectations with respect to,
among other things, the size and quality of the Company's mineral resources,
progress in development of mineral properties, demand and market outlook for
metals and coal and future metal and coal prices. Forward-looking information
is based on the opinions and estimates of management at the date the
information is given, and is subject to a variety of risks and uncertainties
and other factors that could cause actual events or results to differ
materially from those projected in the forward-looking information. These
factors include the inherent risks involved in the exploration and development
of mineral properties, uncertainties with respect to the receipt or timing of
required permits and regulatory approvals, the uncertainties involved in
interpreting drilling results and other geological data, fluctuating metal and
coal prices, the possibility of project cost overruns or unanticipated costs
and expenses, uncertainties relating to the availability and costs of
financing needed in the future and other factors. Mineral resources that are
not mineral reserves do not have demonstrated economic viability. Inferred
mineral resources are considered too speculative geologically to have economic
considerations applied to them that would enable them to be categorized as
mineral reserves. There is no certainty that mineral resources will be
converted into mineral reserves. The forward-looking information contained
herein is given as of the date hereof and the Company assumes no
responsibility to update or revise such information to reflect new events or
circumstances, except as required by law.

For further information:

For further information: Fortune Minerals Limited: Robin Goad,
President; Lindsay Simmons, IR Coordinator, (519) 858-8188, Fax: (519)
858-8155,;; Renmark Financial
Communications: Dan Symons, Account Manager; Rea Unson, Junior Account
Manager, (514) 939-3989, Fax. (514) 939-3717,;;

Custom Packages

Browse our custom packages or build your own to meet your unique communications needs.

Start today.

CNW Membership

Fill out a CNW membership form or contact us at 1 (877) 269-7890

Learn about CNW services

Request more information about CNW products and services or call us at 1 (877) 269-7890