Sego Resources Trenching Locates New Zone



    VANCOUVER, June 5 /CNW/ - Sego Resources reports that additional assay
results have been received from the 3200 metre excavator trenching program on
its Miner Mountain Project. The trenching and reclamation is contracted to the
Upper Similkameen Indian Band and its highly qualified personnel. Vic Preto,
Ph.D., P.Eng. is geological consultant and Qualified Person for NI 43-101. The
current results are from a new zone, the centre of which, is located 850
metres south of the Regal Zone (see news release June 2, 2008). These
excavator trenches are re-trenching of former bulldozer trenching by previous
exploration companies. Excavator trenching has the advantage of greater depth
and greater rock exposure. This southern area is situated within a large
copper, gold soil geochemical anomaly and consists of copper, gold, and silver
mineralization associated with propylitic and potassic alteration in diorite
and microdiorite.
    Sego Resources is planning more trenching to determine whether the Granby
and Regal Zones are linked (a total strike length of 1.5 km) followed by
diamond drilling. Further trenching of this new zone and other soil
geochemical anomalies will be conducted during the drill program.
    Samples in trench 36 and 42 ran higher than the upper limit of accuracy
for copper and gold by ICP methods. For this reason Sego Resources Inc.
re-assayed copper highs for total copper, and gold /silver highs by fire assay
with an ICP finish. These results are in the table. Sample designation: C=1
metre rock chip sample, R=Rock grab sample taken from spoil where trench was
too deep and unstable to safely enter for chip sampling.

    
    Trench 36            Wgt/KG     Cu %   Au Gm/T             Ag Gm/T

    MM08TR36C02           1.55      0.61     0.69                 5.00
    MM08TR36C03           1.63      0.31     0.27       less than 2.00
    MM08TR36C04           1.64      0.20     0.23       less than 2.00
    MM08TR36C05           1.55      0.87     5.46       less than 2.00
    MM08TR36C06           1.82      0.19     0.92       less than 2.00
    MM08TR36C07           1.46      1.02     4.36                 3.00
    MM08TR36C08           1.32      0.32     4.40       less than 2.00
    MM08TR36C09           1.26      0.18     0.41       less than 2.00
    MM08TR36C10           1.25      0.40     4.66       less than 2.00
    MM08TR36C11           1.51      0.22     0.76       less than 2.00
    MM08TR36C12           1.25      0.08     0.58       less than 2.00
    MM08TR36C13           1.83      0.06     0.15       less than 2.00
    MM08TR36C14           1.46      0.35     0.15       less than 2.00
    MM08TR36C15           1.45      0.25     0.08       less than 2.00
    MM08TR36C16           1.42      0.19     0.59       less than 2.00
    MM08TR36C17           1.75      0.58     0.90       less than 2.00
    MM08TR36C18           1.78      0.88     0.59       less than 2.00
    MM08TR36C19           1.55      0.50     0.37       less than 2.00
    MM08TR36C20           1.52      0.07     0.29       less than 2.00
    MM08TR36C21           1.50      0.08     0.20       less than 2.00
    MM08TR36C22           1.38      0.06     0.07       less than 2.00
    MM08TR36C23           1.44      0.10     0.22       less than 2.00
    MM08TR36C24           1.39      0.11     0.20       less than 2.00
    MM08TR36C25           0.94      0.02     0.02       less than 2.00
    MM08TR36C26           1.46      0.02     0.04       less than 2.00
    MM08TR36C27           1.26      0.02     0.03       less than 2.00
    MM08TR36C28           1.86      0.12     0.49       less than 2.00
    MM08TR36C29           1.11      0.04     0.02       less than 2.00
    MM08TR36C30           1.24      0.04     0.44       less than 2.00
    MM08TR36C31           1.73      0.02     0.04       less than 2.00
    MM08TR36C32           1.61      0.21     0.73       less than 2.00
    MM08TR36C33           1.38      0.56     2.70       less than 2.00
    MM08TR36C34           1.41      0.63     2.72       less than 2.00
    -------------------------------------------------------------------
    Weighted Averaged
    32 metres                       0.29     1.00


    Samples C02 - C12 a Weighted Average of 10 metres of 0.40% Cu
    and 2.00 G/T Au

    Samples C16 - C19 a weighted Average of 4 metres of 0.56% Cu
    and 0.62 G/T Au

    Samples C32 - C34 a Weighted Averaged 3 metres of 0.46% Cu
    and 1.99 G/T Au


    Trench 37            Wgt/KG     Cu %   Au Gm/T             Ag Gm/T

    MM08TR37C04           1.33      0.23     0.72       less than 2.00
    MM08TR37C05           1.30      0.18     1.25       less than 2.00
    MM08TR37C06           1.25      0.06     0.25       less than 2.00
    MM08TR37C07           1.65      0.27     2.09       less than 2.00
    -------------------------------------------------------------------
    Weighted Averaged
    4 metres                        0.19     1.15


    Trench 42            Wgt/KG     Cu %  Au Gm/T              Ag Gm/T

    MM08TR42C30           1.13      1.62     0.00                 0.00
    MM08TR42C30           1.22      1.65     0.01       less than 2.00
    MM08TR42C31           1.42      1.07     0.00                 0.00
    MM08TR42C31           1.33      1.09     0.01       less than 2.00
    MM08TR42C32           1.56      0.17     0.01       less than 2.00
    MM08TR42C33           1.84      1.09     0.01       less than 2.00
    MM08TR42C34           1.32      1.09     0.01       less than 2.00
    MM08TR42C35           1.59      0.26     0.01       less than 2.00
    MM08TR42C36           1.95      2.81     0.01                 3.00
    MM08TR42C37           1.64      2.44     0.01       less than 2.00
    MM08TR42C38           2.16      0.44     0.01       less than 2.00
    MM08TR42C39           1.51      0.46     0.01       less than 2.00
    MM08TR42C40           1.57      1.15     0.01                 4.00
    -------------------------------------------------------------------
    Weighted Averaged
    10 metres                       1.18

    

    A map showing the trench locations is available on the Sego website
www.segoresources.com

    The Miner Mountain Project is a Copper Gold Porphyry Project near
Princeton, BC, 15 kilometres north of former producer Copper Mountain Mining
Corporation's advanced project, in the Traditional Territory of the Upper
Similkameen Indian Band. Sego has an MOU with the Upper Similkameen Band. The
Miner Mountain property is 2400 hectares in size. Sego Resources has funding
in place for a one million dollar exploration program in 2008. (Note News
Release dated January 2, 2008)

    This news release has been reviewed and approved by Vic Preto, Ph.D,
P.Eng., an independent qualified person as defined by NI43-101.

    J. Paul Stevenson, CEO
    Sego Resources Inc.

    "No regulatory authority has approved or disapproved the information
contained in this news release. This release includes certain statements that
may be deemed "forward-looking statements". All statements in this release,
other than statement of historical facts, that address future production,
reserve potential, exploration drilling, exploitation activities and events or
developments that the Company expects are forward-looking statements. Although
the Company believes the expectations expressed in such forward-looking
statements are based on reasonable assumptions, statements are not guarantees
of future performance and actual results or developments may differ materially
from the forward-looking statements. Factors that could cause actual results
to differ materially from those in forward-looking statements include market
prices, exploitation and exploration successes, continued availability of
capital and financing, general economic, market or business conditions.
Investors are cautioned that any such statements are not guarantees of future
performance and that actual results or developments may differ materially from
those projected in the forward-looking statements."





For further information:

For further information: SEGO RESOURCES INC., Suite 211-744 West
Hastings Street, Vancouver, BC, V6C 1A5, Tel: (604) 682-2933, Toll Free:
1-866-683-2933, Fax: (604) 683-3911, www.segoresources.com

Organization Profile

SEGO RESOURCES INC.

More on this organization


Custom Packages

Browse our custom packages or build your own to meet your unique communications needs.

Start today.

CNW Membership

Fill out a CNW membership form or contact us at 1 (877) 269-7890

Learn about CNW services

Request more information about CNW products and services or call us at 1 (877) 269-7890