RAYMOND, AB, Sept. 27, 2011 /CNW/ - American Creek Resources Ltd.
(TSXV:AMK) (OTC:ACKRF) has received results from metallurgical work
done to samples taken from the Ironmist property. In August, 2011,
approximately 50kg of surface samples were provided to ALS Ammtec in
Perth Australia for metallurgical testing. Metallurgical supervision
and reporting was provided by ProMet Engineers Pty. Ltd., also of Perth
The September 2011 ProMet report highlighted the following:
DTR tests indicated weight recovery of 73% at 45 microns with an iron
grade of 66.3%, silica at 0.4%, 2.6% Al2O3 and 3.4% TiO2.
57% rejection of tails at 80% passing 500 microns and greater than 20%
at the first separation size of 80% passing 3mm.
Vanadium content is between 0.6% and 0.8%.
The grades listed above can be achieved using a crush and milling
process to 45 microns P80.
The Bond Work Index results indicated a BWI of 18.0 kWh/t.
Further drilling needs to be undertaken to increase the data available
for the deposit.
As noted above, more drilling, with further DTR and metallurgical
testing, will be necessary to move the project forward.
Mike Becherer, P.Geo. is the Qualified Person for the Ironmist project
pursuant to NI 43-101. Mr. Becherer has reviewed and approved the
content of this press release.
American Creek Resources Ltd. is a Canadian junior mineral exploration
company focused on the acquisition, exploration and development of
mineral deposits within the Province of British Columbia, Canada.
Certain information contained in this news release constitutes
forward-looking statements regarding the Corporation's mineral
properties. Forward looking statements are frequently characterized by
words such as "plan", "expect", "project", "intend", "believe",
"anticipate" or statements that certain events or conditions "may" or
"will" occur. Forward-looking statements are based on the reasonable
opinions and estimates of management of American Creek and are subject
to a variety of risks, uncertainties and other factors that could cause
actual events or results to differ materially from those projected in
the forward-looking statements. These factors include: the inherent
risks involved in the exploration and development of mineral
properties, uncertainties involved in the interpretation of drill
results and other geological data, fluctuating commodity prices,
unforeseen permitting requirements, changes in environmental laws or
regulations, the possibility of project cost overruns or unanticipated
costs and expenses, weather conditions, the availability of contractors
for equipment and services, the availability of future financing and
general business and economic conditions. Such statements are also
based on a number of assumptions which may prove to be incorrect,
including assumptions about general business and economic conditions
being accurate, the timing and receipt of regulatory approvals for
projects and operations, the availability of financing, the ability to
secure equipment and labour, and American Creek's ongoing relationship
with third parties. The foregoing factors, risks and assumptions are
not exhaustive. Events or circumstances could cause actual events or
results to differ materially from those estimated or projected and
expressed in, or implied by, these forward-looking
statements. Accordingly, readers should not place undue reliance on
forward-looking statements. These forward-looking statements are as of
the date they are made and American Creek disclaims any obligation to
update any forward-looking statements, except as required by law.
Neither the TSX Venture Exchange nor its Regulation Services Provider
(as that term is defined in the policies of the TSX Venture Exchange)
accepts responsibility for the adequacy or accuracy of this release.
SOURCE American Creek Resources Ltd.
For further information:
please contact Darren Blaney at: Phone: 403 752-4040 or Email: email@example.com. Information relating to the Corporation is available at www.americancreek.com.